PRODUCTS

Details

Product Overview

This antenna in the iPhone 6 Plus is responsible for picking up Wi-Fi signals.

• Remove the following screws securing the antenna bracket to the rear case:

• One 1.5 mm Phillips #00 screw

• One 2.8 mm Phillips #00 screw

• Grasp the 5GHz Wi-Fi antenna bracket with a pair of tweezers and lift it off the iPhone.

• Carefully pry the 5GHz Wi-Fi antenna connector up off the logic board with a plastic opening tool.

• Grasp the 5GHz Wi-Fi antenna connector with a pair of tweezers and gently lift it from its retaining clip on the logic board.

• The two connectors may be coupled by a single adhesive tab. If this is the case, then they may detach as a pair.

• Disconnect the power button cable and audio control cable connectors from their respective sockets on the logic board.

• Remove the following screws securing the 5GHz Wi-Fi antenna to the rear case:

• One 2.8 mm Phillips #00 screw

• Two 1.6 mm Phillips #00 screws

• Use a pair of tweezers to grasp and remove the 5GHz Wi-Fi antenna out of the iPhone.

• During reassembly, make sure to place the small washer in the top left corner of the 5GHz Wi-Fi antenna.

Products Sort