PRODUCTS

Details

Introduction

Follow the steps in this guide to replace the volume control cable in your iPhone 6s Plus.

• Remove the two 2.7 mm Phillips screws over the audio control cable bracket.

• Remove the audio control cable bracket.

• Disconnect the audio control flex cable from its socket on the logic board.

• Remove the circular sticker covering the third screw securing the cellular antenna to the rear case.

• Remove the following three Phillips screws:

• One 2.7 mm screw

• One 1.7 mm screw

• One 1.3 mm screw

• Lift, but do not remove, the cellular antenna to reveal the third screw securing the audio control cable to the rear case.

• Remove the three 2.4 mm Phillips screws over the audio control cable bracket.

• Use the flat end of a spudger to peel the volume control flex cable off the rear case.

• Remove the volume control flex cable.

• The cable assembly has two separate pieces connected by a ribbon cable—the volume control buttons and silent switch.

Products Sort