PRODUCTS

Details

Product Overview

Stay connected to Bluetooth and Wi-Fi!

• Replace a damaged or malfunctioning antenna with this part.

• This part includes the antenna responsible for Bluetooth and Wi-Fi signals.

• Remove the following Phillips #000 screws from the vibrator bracket:

• One 1.7 mm screw

• One 2.5 mm screw

• With a set of tweezers, remove the vibrator bracket.

• Remove the 1.7 mm Phillips #000 screw securing the vibrator to the rear case.

• Use a set of tweezers to remove the vibrator from the rear case.

• Gently peel the vibrator contact pad portion of the upper cable assembly off of the bluetooth and wi-fi antenna.

• Take care not to damage this cable, or you may lose vibrator, or other upper component cable functionality.

• Carefully pry the bluetooth and wi-fi antenna up off of the adhesive holding it to the rear case.

• Remove the bluetooth and wi-fi antenna.

• Be careful not to touch any metal to metal contact points with your bare fingers—use tweezers or gloves. Finger oils may disrupt conductivity. If you do touch any of these components, clean them with a degreaser like windex or isopropyl alcohol before reassembly.

Products Sort