PRODUCTS

Details

Product Overview

Fix those broken buttons!

• If your volume or power buttons have no clicking action, your rear camera flash does not work, or your mute switch doesn't work properly anymore, this may be the part you need.

• This cable connects the volume buttons, mute/silent button, rear camera flash, and the power button to the logic board.

• It also has contacts which the vibrator rests on in order to connect it to the logic board.

• Remove the 1.3 mm Phillips #000 screw securing the logic board grounding bracket to the rear case.

• Remove the logic board grounding bracket.

• Remove the 2.1 mm Phillips #000 screw securing the contact clip and power/sleep button bracket.

• Remove the contact clip from the iPhone.

• During reassembly, be sure the bracket is properly seated between the rear-facing camera flash and the top edge of the case.

• Slide the flat end of a spudger under the upper component assembly cable to free it from the rear case.

• Use the tip of a spudger to free the microphone portion of the assembly from the case.

• Use a set of tweezers to swing the power/sleep button bracket away from the case.

• Use the tip of a spudger to push the power/sleep button into the phone slightly.

• Use a set of tweezers to remove the button.

• Double check the orientation of the button for reassembly. The two "L" shapes should be upside down, and the metal bar should be folded onto the top of the button.

Products Sort