PRODUCTS
|
 |
Details
Product Overview
Repair a sticky or nonfunctional home button.
Includes the home button flex cable assembly, the home button face, and metal ring in colors to match your iPhone 6s or 6s Plus.
This part does not include the gasket that seals the home button face to the front panel of the phone.
Please Note: that only the phone's original home button assembly, paired to the logic board, will be capable of using the Touch ID functionality.
Installing a new home button will only restore ordinary home button functions, not the Touch ID features.
Remove the two 1.9 mm Phillips screws securing the home button bracket.
Remove the home button bracket.
Use the pointed tip of a spudger to disconnect the home button cable from its connector on the display assembly.
Using your fingertip, gently press up on the home button from the front side of the display assembly to slowly separate the home button's rubber gasket from the front panel.
The gasket is very thin and will tear easily. Apply steady pressure and give it time to separate.
Use the pointed end of a spudger to pry the lightly-adhered home button flex cable off the display assembly.
Remove the home button assembly.
